Note: This article is discontinued.
- Product description
-
Product description
Surge arrester, type 2
• For surge protection equipotential bonding to VDE 0100-443 (IEC 60364-4-44)
• Discharge capacity to 40 kA (8/20) per pole through high-performance varistors
• Modular, plug-in arrester with dynamic cut-off unit and visual status display
• Locking mechanism with vibration protection and voltage keying
• Plastic (UL 94 V-0)
- Technical data
-
Technical data
Blow-out no Dimension 1000V Housing material surge protection components PA UL 94 V-0 Installation type On basic element Integrated back-up fuse no Maximum continuous voltage AC 1000 Maximum discharge current (8/20 μs) 40 kA Maximum discharge current (8/20 μs) [L-N] 40 kA Network form Other Nominal discharge current (8/20 µs) 20 kA Nominal discharge current (8/20 µs) [L-N] 20 kA Nominal voltage AC (50/60 Hz) 750 V Operating temperature, max. 80 °C Operating temperature, min. -40 °C Pole number 1 Pole version 1 Protection rating IP20 Remote signalling no Short-circuit resistant yes Signalling on device Visual SPD to EN 61643-11 Type 2 SPD to IEC 61643-1 Class II Test class, type 2 yes Dimensions
Minimum distance 3 mm Connectivity options
Protection level [L-N] ≤4,2 Short-circuit resistance for max. mains-side overcurrent protection 50 kA eff SPD to UL 1449 Type 4 - All types
-
All types
- Downloads
-
Data sheet V20-0-1000 / 5095378 , 0.18MB , pdfCatalogue Überspannungsschutz , 28.42MB , pdfDeclaration of conformity V20-0-1000 / 5095378 , 0.13MB , pdfInstallation instructions Brief installation instructions V20-1000 , 0.06MB , pdf