Note: This article is discontinued.
You can find the current article here: 5095171 / Surge arrester V20, 1-pole, 320 V
- Product description
-
Product description
SurgeController cover ‒ type 1 + 2 surge arrester
• Plug-in cover; upper part can be separated from base without tools
• Incl. thermal and dynamic cut-off unit and visual display of defects
• High current conductivity and long service life
Upper part
- Technical data
-
Connectivity options
Arrester surge current (8/20 µs) [total] 20 kA Conductor cross-section, flexible (fine-wire), min. 25 mm² Conductor cross-section, rigid (single-wire/multiwire), max. 35 mm² Dimension 320V Installation type On basic element Integrated back-up fuse no Lightning protection zone LPZ 0→2 Max. mains-side overcurrent protection 125 Maximum back-up fuse 125 A Maximum continuous voltage AC 320 V Maximum continuous voltage DC 420 V Maximum discharge current (8/20 μs) 40 kA Network form TN Nominal discharge current (8/20 µs) 20 kA Nominal discharge current (8/20 µs) [L-N] 20 kA Nominal voltage AC (50/60 Hz) 320 V Operating temperature, max. 80 °C Operating temperature, min. -40 °C Pole version 1 Protection rating IP20 Response time <25 ns Signalling on device Visual SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 Class I+II Test class, type 2 yes Version for 1-pin cover; 320 V - All types
-
All types
- Downloads
-
Data sheet V20-B+C 0-320 / 5099847 , 0.23MB , pdfDeclaration of conformity V20-B+C 0-320 / 5099847 , 0.06MB , pdfLabel approval VDE symbol approval, V20 , 0.12MB , pdfLabel approval KEMA-KEUR certificate V20 , 2.00MB , pdfLabel approval EZU certificate V20 , 2.00MB , pdfTechnical information Technical information, V 20-B+C/0-320 , 0.10MB , pdf